DIY | Studded Braceleto

Okay so I promised I would upload the tutorial so here it is! 

What you'll need:

Elastic

Pencil

Studs

 Scissors

 Fabric Glue

        1) Measure the elastic so it fits your wrist, leave a little space for the tab that will hold the bracelet together.

2) Mark out the tab, it should be around 1-2 centimeters away from the end of the elastic

              3) Push the stud through the elastic.

                      4) Now take the scissors and bend the prongs of the studs inwardly.

5) Stud from one side all the way along to the tab mark. DON'T STUD THE TAB! 

                  6) Now use the scissors to cut off the remaining elastic.

                    7) I used nail scissors to cut off all the really fine bits of elastic.

                     8) Finally, glue the bracelet together by gluing the little tab to the other end of the bracelet!     

Then leave it to dry and your finished!

Hope you enjoyed it! 

Byyeeeee!! xxxxxx